|
Servers - Supermicro S2011
SKU : 108662 Mfg. Part No. : SYS-F627R3-FTPT+
SYS-F627R3-FTPT+ 4U FatTwin w/4-nodes ( 2xS2011 2x3.5" 2x10G-LAN IPMI) 4x1280W
4U w/ 4-Hot-Plug-Node Rackmount (Specs per Node) - CSE-F424AL-R1K28B Chassis - X9DRFF-iT+ Motherboard - Quad Socket R / LGA 2011 - (0 CPU(s) Installed) - 2 CPUs Maximum - Max. 4 Blades - 0GB RAM (1024GB Max) - Intel C602 SATA RAID Controller - 2x 3.5" LFF Hot-Swap SATA/SAS HDD(s) Max. - Intel X540 Dual-Port 10Gb Ethernet LAN RJ45 - 4x1280W Hot-Swappable / Redundant PSU - Front-Mounted I/O Ports - 1 Year Depot Carry-In Mfg. Warranty
Price : $5510.00*
** DISCONTINUED PRODUCT ** ** NO LONGER AVAILABLE FOR PURCHASE ** This information is for archival purposes.
(* - Cash Discounted Price (Reg. $5785.50))
4U FatTwin Key Features:
4 Hot-plug System Nodes in 4U Front I/O.
Each node supports:
1. Intel® Xeon® processor E5-2600 family; QPI up to 8GT/s
2. Up to 512GB DDR3 1600MHz ECC Registered DIMM; 16x DIMM sockets
3. 1 PCI-E 3.0 x16 (LP), 1 PCI-E 3.0 x8 (LP) and 1 PCI-E 2.0 x4 (LP)
4. Front I/O ports: Dual 10GBase-T, 2 USB 2.0, and 1 VGA connector
5. Built-in Server management tool (IPMI 2.0, KVM/media over LAN) with dedicated LAN port
6. 2x 3.5" Hot-swap SATA HDDs
7. 1280W Redundant Power Supplies Platinum Level (95
|
SYS-F627R3-FTPT+ |
-
SuperServer F627R3-FTPT+ (Black)
|
|
|
CPU |
-
Intel® Xeon® processor E5-2600 (up to 135W TDP *)
-
Dual Socket R (LGA 2011)
* Please contact your Supermicro sales representative for additional details |
Cache |
|
System Bus |
|
|
|
Memory Capacity |
-
16x 240-pin DDR3 DIMM sockets
-
Supports up to 512 GB DDR3 ECC Registered memory (RDIMM)
-
Supports up to 128 GB DDR3 ECC Un-Buffered memory (UDIMM)
|
Memory Type |
-
1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes |
-
32GB, 16GB, 8GB, 4GB, 2GB, 1GB
|
Memory Voltage |
|
Error Detection |
-
Corrects single-bit errors
-
Detects double-bit errors (using ECC memory)
|
|
|
Chipset |
|
AHCI SATA |
-
SATA 2.0 3Gbps with RAID 0, 1, 5, 10
-
SATA 3.0 6Gbps with RAID 0, 1
|
IPMI |
-
Support for Intelligent Platform Management Interface v.2.0
-
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
-
Nuvoton WPCM450 BMC
|
Network Controllers |
-
Intel® X540 Dual Port 10GBase-T
-
Virtual Machine Device Queues reduce I/O overhead
-
Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
-
1x Realtek RTL8201F PHY (dedicated IPMI)
|
Graphics |
|
|
|
AHCI SATA |
-
2x SATA 3.0 ports (6Gbps)
|
LAN |
-
2x RJ45 10GBase-T ports
-
1x RJ45 Dedicated IPMI LAN port
|
USB |
|
VGA |
|
Serial Port / Header |
|
|
Form Factor |
|
Model |
|
|
|
Width |
|
Height |
|
Depth |
|
Weight |
-
Net Weight: 105 lbs (47.63 kg)
-
Gross Weight: 150 lbs (68.04 kg)
|
Available Colors |
|
|
|
Buttons |
-
Power On/Off button
-
System Reset button
|
LEDs |
-
Power status LED
-
Hard drive activity LED
-
2x Network activity LEDs
-
System Overheat LED
-
Power fail LED
|
|
|
PCI-Express |
-
1x PCI-E 3.0 x16 (LP)
-
1x PCI-E 3.0 x8 (LP)
-
1x PCI-E 2.0 x4 (LP)
|
|
|
Hot-swap |
-
2x 3.5" Hot-swap SATA HDD trays
|
|
|
1x SAS2 / SATA backplane |
|
|
Fans |
-
8x 8cm heavy duty fans with air shroud and PWM fan speed control
|
|
|
1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 |
AC Input |
-
1000W Output @ 100-140V, 12-8A, 50-60Hz
-
1280W Output @ 180-240V, 8-6A, 50-60Hz
|
DC Output |
-
1000W: +12V/83A; +5Vsb/4A
-
1280W: +12V/106.7A, +5Vsb/4A
|
Certification |
Platinum Certified
[ Test Report ] |
|
|
BIOS Type |
-
128Mb SPI Flash EEPROM with AMI BIOS
|
BIOS Features |
-
Plug and Play (PnP)
-
APM 1.2
-
PCI 2.2
-
ACPI 1.0 / 2.0
-
USB Keyboard support
-
SMBIOS 2.3
-
UEFI
|
|
|
RoHS |
|
Environmental Spec. |
-
Operating Temperature:
10°C to 35°C (50°F to 95°F)
-
Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
-
Operating Relative Humidity:
8% to 90% (non-condensing)
-
Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|