ATIC Computers - Motherboards / Supermicro S1356 - MBD-X9DB3-TPF-O - X9DB3-TPF 2x S1356 SAS/SATA 10GL-SPF+ IPMI eATX

Dual Socket B2 / LGA 1356 - Intel C606 Chipset - 12 RAM Slots - Max. 384GB DDR3 ECC RDIMM - Matrox G200eW Graphics - 1x VGA Ports - 1x PCIeX16 Slots - 2x PCIeX8 Slots - 2x PCIeX4 Slots - 1x PCI Slots - 4x SATA 3.0Gbps - 2x SATA 6.0Gbps - RAID 0/1/5/10 Supported - 8x SAS 3.0Gbps Ports - SAS RAID 0/1/10 Supported - SFP+ 10Gb Ethernet + Dual Gigabit LAN - SSI CEB (12.0" x 10.5") Form Factor - IPMI 2.0 - 1x DOM (Disk on Module) power connector - 1 Year Depot Carry-In Mfg. Warranty

Price : $550.00* ** DISCONTINUED PRODUCT **
** NO LONGER AVAILABLE FOR PURCHASE **
This information is for archival purposes.

Product SKUs

MBD-X9DB3-TPF -O	X9DB3-TPF (Standard Retail Pack)
MBD-X9DB3-TPF -B	X9DB3-TPF (Bulk Pack)


Physical Stats

Dimensions	12" x 13" (30.48cm x 33.02cm)


Processor/Cache

CPU	Intel® Xeon® processor E5-2400 (up to 95W TDP )** Dual Socket B2 (LGA 1356)
Cache	Up to 20MB
System Bus	QPI up to 8 GT/s
	** Motherboard supports this maximum TDP. Please verify your system can thermally support


System Memory

Memory Capacity	12x 240-pin DDR3 DIMM sockets Supports up to 384 GB DDR3 ECC Registered memory (R/LRDIMM) Supports up to 96 GB DDR3 ECC/non-ECC Un-Buffered memory (UDIMM)
Memory Type	1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs Support ECC and non-ECC UDIMMs
DIMM Sizes	32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage	1.5 V, 1.35 V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory)


On-Board Devices

Chipset	Intel® C606 chipset
SATA	SATA 2.0 3Gb/s with RAID 0, 1, 5, 10 SATA 3.0 6Gb/s with RAID 0, 1, 5, 10
SAS	SAS from C606 RAID 0, 1, 10 support
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC
Network Controllers	Intel® 82599EN Single Port 10G SFP+ Intel® i210 Dual Port Gigabit Ethernet Virtual Machine Device Queues reduce I/O overhead Supports 10G SFP+, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201F PHY (dedicated IPMI) (Both CPUs need to be installed for 10Gb LAN port to be enabled)
Video	Matrox G200eW


Input / Output

SATA	2 SATA 3.0 ports (6Gb/s) 4 SATA 2.0 ports (3Gb/s)
SAS	8 SAS ports (3Gb/s)
LAN	1 SFP+ 10GbE LAN port 2 RJ45 Gigabit Ethernet LAN ports 1 RJ45 Dedicated IPMI LAN port
USB	8 USB 2.0 ports total (2 rear + 4 via header + 2 Type A)
Video	1 VGA port
Serial Port / Header	2 Fast UART 16550 ports: 1 rear, 1 header
DOM	1 DOM (Disk on Module) power connector
TPM	1 TPM 1.2 20-pin Header

Chassis ( Optimized for X9DB3-TPF )

Important Chassis Notes	To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.


Expansion Slots

PCI-Express	1x PCI-E 3.0 x16 2x PCI-E 3.0 x8 1x PCI-E 3.0 x4 (in x8) 1x PCI-E 2.0 x4 (in x8) 1x PCI-32 Legacy


System BIOS

BIOS Type	128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features	Plug and Play (PnP) APM 1.2 PCI 2.3 ACPI 1.0 / 2.0 / 3.0 / 4.0 USB Keyboard support SMBIOS 2.7.1 UEFI 2.3.1


Management

Software	SuperDoctor® III Watch Dog NMI IPMI 1.5 / 2.0
Power Configurations	ACPI / APM Power Management Power-on mode for AC power recovery


PC Health Monitoring

Voltage	Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. 5+1 Phase-switching voltage regulator
FAN	Eight 4-pin fan headers with tachometer monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control Pulse Width Modulated (PWM) fan connectors
Temperature	Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x Fan Connectors Thermal Monitor 2 (TM2) support PECI
LED	CPU / System Overheat LED Suspend static indicator LED UID/Remote UID
Other Features	Chassis intrusion detection Chassis intrusion header RoHS Dual Cooling Zones



Operating Environment

Operating Temperature Range	10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range	-40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range	8% - 90% (non-condensing)
Non-Operating Relative Humidity Range	5% - 95% (non-condensing)