Local: 604-875-8859   Toll-Free: 1-877-279-2469     email: sales@ATIC.ca

Servers - Supermicro S2011

SKU : 109276         Mfg. Part No. : SYS-1027GR-72RT2

SYS1027GR-72RT2 1U dual-S2011 16xDR3 3x GPU 4x2.5"SAS 2x1600W

(CSE-118GH-R1K66B X9DRG-HTF+II ) - Intel Xeon LGA-2011 E5-26xx V1/ V2 CPU - for 3x GPU - 1U Rackmount - Socket R / LGA 2011 - 2 CPUs Maximum - (Per CPU 512GB Max) - Intel C602 SATA RAID Controller + LSI 2208 SAS RAID Controller - 4x 2.5" SFF Hot-Swap SATA/SAS HDD(s) Max. - Intel X540 Dual-Port 10Gb Ethernet LAN RJ45 - 2x1600W Hot-Swappable / Redundant PSU - 1 Year Depot Carry-In Mfg. Warranty

Price : $2620.00*  ** DISCONTINUED PRODUCT **
** NO LONGER AVAILABLE FOR PURCHASE **
This information is for archival purposes.

(* - Cash Discounted Price (Reg. $2751.00))

 

Product SKUs
SYS-1027GR-72RT2+	SuperServer 1027GR-72RT2+ (Black)

Motherboard

Super X9DRG-HTF+II

Processor/Cache
CPU	Intel® Xeon® processor E5-2600 family (up to 130W TDP) Dual Socket R (LGA 2011)
Cache	Up to 20MB
System Bus	QPI up to 8 GT/s

GPU/Xeon Phi Support

M2090, up to 130W CPU at 30°C M2075, up to 130W CPU at 35°C K10/K20/K20X (Kepler), up to 130W CPU at 30°C Xeon Phi, up to 130W CPU at 30°C

System Memory
Memory Capacity	16x 240-pin DDR3 DIMM sockets Supports up to 512 GB DDR3 ECC Registered memory (RDIMM) Supports up to 128 GB DDR3 ECC and non-ECC UDIMM
Memory Type	1600/1333/1066MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage	1.5 V, 1.35 V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory)

On-Board Devices
Chipset	Intel® C602 Chipset
SATA	SATA 2.0 3Gbps with RAID 0, 1, 5, 10 SATA 3.0 6Gbps with RAID 0, 1
SAS	SAS2 (6Gbps) via LSI 2208 AOC-S2208-E16AR+II HW RAID 0, 1, 5 , 10 support
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC
Network Controllers	Intel® X540 Dual Port 10GBase-T Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Graphics	Nuvoton WPCM450 BMC

Input / Output
SATA	2x SATA3 (6Gbps) ports 2x SATA2 (3Gbps) ports
SAS	4x HW RAID SAS2 (6Gbps) ports
LAN	2x RJ45 10GbE ports 1x RJ45 Dedicated IPMI LAN port
USB	2x USB 2.0 ports
Video	1x VGA Connector
Serial Port	1x Serial header

System BIOS
BIOS Type	16Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features	Plug and Play (PnP) APM 1.2 DMI 2.3 PCI 2.3 ACPI 1.0 / 2.0 / 3.0 USB Keyboard support SMBIOS 2.7.1 UEFI

Chassis
Form Factor	1U Rackmount
Model	CSE-118GH-R1K66B

Dimensions
Height	1.7" (43mm)
Width	17.2" (437mm)
Depth	30.6" (777mm)
Gross Weight	48 lbs (21.8 kg)
Available Color	Black

Front Panel
Buttons	Power On/Off button System Reset button
LEDs	Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED / Fan fail LED / UID LED

Expansion Slots
PCI-Express	3x PCI-E 3.0 x16 slots (support GPU/Xeon Phi cards, optional) 1x PCI-E 3.0 x8 (in x16) low-profile slot

Drive Bays
Hot-swap	4x 2.5" Hot-swap SAS/SATA drive bays

Backplane

SAS/SATA HDD Backplane

System Cooling
Fans	10x counter-rotating fans with optimal fan speed control

Power Supply
1000W/1600W 1U Redundant Power Supply
AC Input	1000W @ 100-127V, 12.9A Max., 50-60Hz 1600W @ 200-240V, 9.5A Max., 50-60Hz
DC Output	1000W: +12V/82A; +12Vsb/2A 1600W: +12V/132A; +12Vsb/2A
Certification	Platinum Level (Cert. in progress)

PC Health Monitoring
CPU	Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages. CPU Core 6-Phase-switching voltage regulator
FAN	Total of ten 4-pin PWM fans 10x fans with tachometer monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control
Temperature	Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 10x Fan Connectors PSU I2C temperature sensing logic Thermal Monitor 2 (TM2) support PECI
LED	Power Fail / Overheat LED Suspend-state Indicator LED UID LED
Other Features	SDDC Support

Operating Environment / Compliance
RoHS	RoHS Compliant
Environmental Spec.	Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)

Parts List - (Items Included)
	Part Number	Qty	Description
Motherboard / Chassis	MBD-X9DRG-HTF+II   CSE-118GH-R1K66B	1   1	Super X9DRG-HTF+II Motherboard   1U Black SC118GQ Chassis
Air Shroud	MCP-310-11802-0N	1	Air Shroud for X9DRG-HF used in SC118GQ-R1800B
Backplane	BPN-SAS-118G-4	1	SAS-118G-4; supports 4X2.5" SATA HDD,
Cable 1	CBL-0157L-01	1	8 pin to 8 pin ribbon SGPIO cable with tube, 61.5cm, PBF
Cable 2	CBL-0296L	5	4 pin to 4 pin fan extension cord, for PWM fan. 23cm. 24AWG
Cable 3	CBL-0333L	6	6+2 pin to 8 pin GPU power extension from MB, 30cm. 18/20AWG
Cable 4	CBL-0460L	1	8 Pin to Two 4 Pin Backplane Power Ext. 28/22cm. 18AWG
Cable 5	CBL-0473L	4	21cm 30AWG SATA S-S cable
Riser Card	RSC-R1UG-E16A+II	1	R1UG-E16A+II
Riser Card	RSC-R1UG-E16B+II	1	R1UG-E16B+II
Riser Card	RSC-R1UG-E16R+II	1	R1UG-E16R+II
Heatsink / Retention	SNK-P0047PS	1	1U Passive CPU Heat Sink for X9 Generation Motherboards w/ Narrow ILM
Heatsink / Retention	SNK-P0047PSC	1	1U Passive Front CPU Heat Sink for X9DRG-HF 1U GPU Server
Power Supply	PWS-1K66P-1R	2	1U 1600W Redundant Platinum Power Supply 73.5mm width,RoHS/REACH,PBF
Cable 6	CBL-0160L	2	NEMA5-15P to C13 US power cord 16AWG 6ft, PBF (default for high watt)
Fan 1	FAN-0141L4	10	40x40x56 mm 20.5K RPM / 17.6K RPM Counter-rotating Fan
Drive Tray(s)	MCP-220-00047-0B	4	Black gen 3rd hot-swap 2.5inch HDD tray
Mounting Rails	MCP-290-00054-0N	1 set	Rail set, quick/quick, optional for 1U 17.2
Add-on Card	AOC-S2208-E16AR+II-O-P	1	AOC with LSI 2208