Motherboards - Supermicro S1356
SKU : 96534 Mfg. Part No. : MBD-X9DBU-IF-O
X9DBU-IF Dual S1567 SATA 2xG-LAN UIO IPMI p-ATX
intel C606 Chipset - Dual S1356 Xeon for E5-24xx - 2x SATA3, 4x SATA2 port - Dual G-LAN ports, 1x KVM IPMI2.0 port - 12x DDR3-ECC/REG Slots - UIO Slot - p-ATX - Dual Socket B2 / LGA 1356 - 1 Year Depot Carry-In Mfg. Warranty - SSI CEB (12.0" x 10.5") Form Factor - IPMI 2.0 - 1x DOM (Disk on Module) power connector - 1 Year Depot Carry-In Mfg. Warranty
Price : $465.00*
** DISCONTINUED PRODUCT ** ** NO LONGER AVAILABLE FOR PURCHASE ** This information is for archival purposes.
(* - Cash Discounted Price (Reg. $488.25))
Specifications
Form Factor :
SSI CEB (12.0" x 10.5")
Special Features :
1x DOM (Disk on Module) power connector
Warranty :
1 Year Depot Carry-In Mfg. Warranty
MBD-X9DBU-iF -B
Form Factor
Dimensions
12" x 13" (30.5cm x 33.0cm)
CPU
Intel® Xeon® processor E5-2400 (up to 95W TDP **)
Dual Socket B2 (LGA 1356)
Cache
System Bus
** Motherboard supports this maximum TDP. Please verify your system can thermally support
Memory Capacity
12x 240-pin DDR3 DIMM sockets
Supports up to 384 GB DDR3 ECC Registered memory (R/LRDIMM)
Supports up to 96 GB DDR3 ECC/non-ECC Un-Buffered memory (UDIMM)
Memory Type
1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
Support ECC and non-ECC UDIMMs
DIMM Sizes
32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Chipset
AHCI SATA
SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SATA 3.0 6Gbps with RAID 0, 1, 5, 10
SCU SATA
SATA 2.0 3Gbps with RAID 0, 1, 5, 10
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC
Network Controllers
Intel® i350 Dual Port Gigabit Ethernet
Virtual Machine Device Queues reduce I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201F PHY (dedicated IPMI)
Video
AHCI SATA
2x SATA 3.0 ports (6Gbps)
4x SATA 2.0 ports (3Gbps)
SCU SATA
4x SATA 2.0 ports (3Gbps)
LAN
2x RJ45 Gigabit Ethernet LAN ports
1x RJ45 Dedicated IPMI LAN port
USB
8x USB 2.0 ports total
(2 rear + 4 via header + 2 Type A)
Video
Keyboard/Mouse
PS/2 Keyboard/Mouse ports
Serial Port / Header
2x Fast UART 16550 ports / 1 rear and 1 header
DOM
1 DOM (Disk on Module) power connector
TPM
1U Chassis
2U Chassis
Tower / 4U Rackmount
CSE-417E16-R1K28UB
CSE-417E26-R1K28UB
CSE-847A-R1K28UB
CSE-847E16-R1K28UB
CSE-847E26-R1K28UB
Important Chassis Notes
To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.
PCI-Express
1x PCI-E 3.0 x24 (left hand side
riser card support)
1x PCI-E 3.0 x8 (right hand side
riser card support)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.)
BIOS Type
64Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
Plug and Play (PnP)
APM 1.2
PCI 2.3
ACPI 1.0 / 2.0 / 3.0 / 4.0
BIOS rescue hot keys
USB Keyboard support
SMBIOS 2.7.1
UEFI 2.3.1
Software
Power Configurations
ACPI / APM Power Management
Power-on mode for AC power recovery
Voltage
Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, 4 Memory Voltages.
5+1 Phase-switching voltage regulator
FAN
6x 4-pin fan headers with tachometer monitoring
Status monitor for speed control
Status monitor for on/off control
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 6x Fan Connectors
Thermal Monitor 2 (TM2) support
PECI
LED
CPU / System Overheat LED indicator
Suspend static indicator LED
UID/Remote UID
Other Features
Chassis intrusion detection
Chassis intrusion header
SDDC Support
RoHS
Dual cooling zones
Operating Temperature Range
10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range
-40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
5% - 95% (non-condensing)