Motherboards - Supermicro S2011
SKU : 96553 Mfg. Part No. : MBD-X9DRG-QF-B
X9DRG-QF Dual-S2011 DDR3 SATA Dual-GLAN eATX
Dual Socket R / LGA 2011 - Intel C602 Chipset - 16 RAM Slots - Max. 512GB DDR3 ECC RDIMM - Nuvoton BMC G200 Graphics - 1x VGA Ports - 4x PCIeX16 Slots - 2x PCIeX8 Slots - 1x PCIeX4 Slots - 8x SATA 3.0Gbps - 2x SATA 6.0Gbps - RAID 0/1/5/10 Supported - Dual Intel i350 GLAN Ethernet RJ45 Ports LAN - Proprietary Form Factor - IPMI 2.0 - 1x DOM (Disk on Module) power connector - 1 Year Depot Carry-In Mfg. Warranty
Price : $650.00*
** DISCONTINUED PRODUCT ** ** NO LONGER AVAILABLE FOR PURCHASE ** This information is for archival purposes.
(* - Cash Discounted Price (Reg. $682.50))
Key Features:
1. Dual socket R (LGA 2011) supports Intel® Xeon® processor E5-2600
2. Intel® C602 chipset; QPI up to 8.0GT/s
3. Up to 512GB DDR3 1600MHz ECC Registered DIMM; 16x DIMM sockets
4. Expansion slots: 4 PCI-E 3.0 x16 (double-width), 2 PCI-E 3.0 x8 (1 in x16 slot), 1 PCI-E 2.0 x4 (in x8 slot)
5. Intel® i350 Dual port GbE LAN
6. 8x SATA2 ( 4x in AHCI, 4x in SCU) and 2x SATA3 ports
7. Integrated IPMI 2.0 and KVM with Dedicated LAN
8. 10x USB 2.0 ports (4 rear, 4 via header + 2 Type A)
Specifications
CPU Socket :
Dual Socket R / LGA 2011
Memory Type :
DDR3 ECC RDIMM
Memory Speed (Non-OC) :
1866/1800/1600/1333/1066
Graphics Processor :
Nuvoton BMC G200
RAID Capabilities :
0/1/5/10
Network Interface :
Dual Intel i350 GLAN Ethernet RJ45 Ports
External USB 2.0 Ports :
4
Internal USB 2.0 Ports :
4 + 2 ( type-A )
Special Features :
1x DOM (Disk on Module) power connector
Warranty :
1 Year Depot Carry-In Mfg. Warranty
MBD-X9DRG-QF -B
Form Factor
Dimensions
15.2" x 13.2" (38.6cm x 33.5cm)
CPU
Intel® Xeon® processor E5-2600 (up to 150W TDP **)
Dual Socket R (LGA 2011)
Cache
System Bus
** Motherboard supports this maximum TDP. Please verify your system can thermally support
Memory Capacity
16x 240-pin DDR3 DIMM sockets
Supports up to 512 GB DDR3 ECC Registered memory (RDIMM)
Supports up to 128 GB DDR3 ECC/non-ECC Un-Buffered memory (UDIMM)
Memory Type
1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
Support ECC and non-ECC UDIMMs
DIMM Sizes
32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Chipset
AHCI SATA
SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SATA 3.0 6Gbps with RAID 0, 1, 5, 10
SCU SATA
SATA 2.0 3Gbps with RAID 0, 1, 5, 10
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Renesas SH7757 BMC
Network Controllers
Intel® i350 Dual Port Gigabit Ethernet
Virtual Machine Device Queues reduce I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
Video
G200 (Renesas SH7757 BMC)
AHCI SATA
2x SATA 3.0 ports (6Gbps)
4x SATA 2.0 ports (3Gbps)
SCU SATA
4x SATA 2.0 ports (3Gbps)
LAN
2 RJ45 Gigabit Ethernet LAN ports
1 RJ45 Dedicated IPMI LAN port
USB
10 USB 2.0 ports total
(4 rear + 4 via header + 2 Type A)
Video
Serial Port / Header
1 Fast UART 16550 port / 1 Header
DOM
1 DOM (Disk on Module) power connector
TPM
Tower / 4U Rackmount
Important Chassis Notes
To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.
PCI-Express
4x PCI-E 3.0 x16 (double-width) slots
2x PCI-E 3.0 x8 (1 in x16) slot
1x PCI-E 2.0 x4 (in x8) slot
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.)
BIOS Type
128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
Plug and Play (PnP)
APM 1.2
PCI 2.3
ACPI 1.0 / 2.0 / 3.0 / 4.0
BIOS rescue hot keys
USB Keyboard support
SMBIOS 2.7.1
UEFI 2.3.1
Software
Power Configurations
ACPI / APM Power Management
CPU Fan auto-off in sleep mode
Power-on mode for AC power recovery
Voltage
Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
5+1 Phase-switching voltage regulator
FAN
10x 4-pin fan headers (up to 10 fans)
10x fans with tachometer monitoring
Status monitor for speed control
Status monitor for on/off control
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 8x Fan Connectors
Thermal Monitor 2 (TM2) support
PECI
LED
CPU / System Overheat LED
Suspend static indicator LED
UID/Remote UID
Other Features
Chassis intrusion detection
Chassis intrusion header
SDDC Support
RoHS
Dual Cooling Zones
Operating Temperature Range
10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range
-40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
5% - 95% (non-condensing)